Belinka Oil Paraffin Belinka Oil Paraffin is used for the protection of wooden elements in saunas. It increases resistance to dirt and humidity. It is suitable for the protection of all types of wood.colorless impregnationfor the protection of wooden elements in saunasdoes not dry, it is colorless, odourless and flavourless The Belinka Oil Paraffin does not form a protective film on the surface, so it is recommended to check and renovate oiled surfaces. The required maintenance interval depend on the type of wood, mechanical load and exposure to humidity. It is recommended to refresh the surface several times a year with the same product. ShareUseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Applied to wooden surfaces free of grease, wax, and other impurities. Prior to application, the wood surface should be finely sanded and dusted off. Apply the oil abundantly onto a well-dried surface using a cloth, brush or roller. Before applying the oil the wood must be well dried, otherwise protection is not satisfactory. After approx. 30 minutes, wipe the excess oil with a clean absorbent cloth or absorbent paper, then polish the surface with a dry cloth.We advise against coating with this product if the temperature is below 15 °C. Clean the tools immediately after use with water and detergent, or with Belsol.Composition: paraffin oil. Consumption: 60–100 ml/m2 of wood surface, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent, or with Belsol. Storage: in the originally sealed packaging at a temperature between 5 °C and 30 °C. Keep out of reach of children. Packaging unit: 0.5 l Surface area 0.1 m2Consumption l in one applicationThe calculation is informative. Material safety data sheets Technical data UseTechnical dataInformative calculation of consumptionMaterial safety data sheetsTechnical documentation Applied to wooden surfaces free of grease, wax, and other impurities. Prior to application, the wood surface should be finely sanded and dusted off. Apply the oil abundantly onto a well-dried surface using a cloth, brush or roller. Before applying the oil the wood must be well dried, otherwise protection is not satisfactory. After approx. 30 minutes, wipe the excess oil with a clean absorbent cloth or absorbent paper, then polish the surface with a dry cloth.We advise against coating with this product if the temperature is below 15 °C. Clean the tools immediately after use with water and detergent, or with Belsol. Composition: paraffin oil. Consumption: 60–100 ml/m2 of wood surface, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent, or with Belsol. Storage: in the originally sealed packaging at a temperature between 5 °C and 30 °C. Keep out of reach of children. Packaging unit: 0.5 l Surface area 0.1 m2Consumption l in one applicationThe calculation is informative. Material safety data sheets Technical data Other products in this category Belinka Oil Exteriercolorless bio impregnationdecking, garden furniture, cladding, joinerycontains agents that slow down mold developmenthas a citrusy scent and dries quickly ... Belinka Oil Interiercolorless impregnationfor the protection and maintenance of interior wooden surfacesforms a thin film on the surface that gives quality protection and a pleasant smooth surfacean oiled surface is water repellent and dries quicklysuitable for coating children’s toys ... Belinka Oil Food Contactcolorless bio impregnationfor the protection and maintenance of wooden surfaces that come into contact with foodthe impregnation is absorbed deeply into the wood, and it makes the surface water-repellent ... Belinka Oil Tungcolorless bio impregnationfor the protection of weather exposed wooden elements, and of wood on yachts or other vesselsa well treated wooden surface is water-repellent, has a silky gloss and does not yellow over time ... Belinka Oil Deckingfor protection and maintenance of exterior walkable wooden surfaces and garden furniturecontains UV filters and UV absorbersincreases the resistance to weatheringrepels water and dirtavailable in five carefully selected colour shades ...
