Base Belinka Base is a colourless impregnation coating intended for preventive wood protection. preventive wood protection against blueing, insects and fungi contains the most advanced biocides improves the adhesive quality of finish coatings It contains the most advanced biocides and protects wood from biological pests, blueing, fungi and insects. Warning Use biocides safely. Always read the label and product information before use. Share UseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Base is used as the first coat to protect wood directly or indirectly exposed to the elements and decay (wood in very damp places, timber roof joinery, wood in contact with walls, windows, exterior and garage doors, shutters, balcony railings, façade coverings, exposed parts of beams, patio and garden fences, wooden sheds, vineyard cottages, log cabins, etc.). In interiors it is used where wood is threatened by damp and has to be protected from mould and putrefaction and also to prevent wood insects settling. Composition: the most advanced biocides, alkyd resins and organic solvents Method of application: brush, dipping (immersion) or pouring Coverage: for optimum protection use 1 l of Base for 5-10 m2 wood (depending on the type and quality of wood, surface treatment and method of application) Drying time: 2-3 hours, next coat after 12 hours Tool cleaning: with Belsol, white spirit, turpentine or cellulose thinner Storage: in original sealed packaging at a temperature below 30°C, separate from foodstuffs and fodder, out of reach of children Flash point: above 61°C Packaging: 0.75 l, 2.5 l, 5 l, 10 l Surface area 0.15 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Use Technical data Informative calculation of consumption Material safety data sheets Technical documentation Base is used as the first coat to protect wood directly or indirectly exposed to the elements and decay (wood in very damp places, timber roof joinery, wood in contact with walls, windows, exterior and garage doors, shutters, balcony railings, façade coverings, exposed parts of beams, patio and garden fences, wooden sheds, vineyard cottages, log cabins, etc.). In interiors it is used where wood is threatened by damp and has to be protected from mould and putrefaction and also to prevent wood insects settling. Composition: the most advanced biocides, alkyd resins and organic solvents Method of application: brush, dipping (immersion) or pouring Coverage: for optimum protection use 1 l of Base for 5-10 m2 wood (depending on the type and quality of wood, surface treatment and method of application) Drying time: 2-3 hours, next coat after 12 hours Tool cleaning: with Belsol, white spirit, turpentine or cellulose thinner Storage: in original sealed packaging at a temperature below 30°C, separate from foodstuffs and fodder, out of reach of children Flash point: above 61°C Packaging: 0.75 l, 2.5 l, 5 l, 10 l Surface area 0.15 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Other products in this category Belocid Plus treats infected wood destroys putrefactive fungi and insects preventive action contains the most advanced biocides ... Impregnant Active Impregnation for all types of wood Protects against insects, wood rot and bluestain Contains the most advanced biocides Has no unpleasant smell ...
