Belinka Oil Food Contact Belinka oil food contact is an impregnation agent based on refined vegetable oils with added aromatic oils and other additives, used for the protection and maintenance of massive and veneered wooden surfaces in living areas. It is suitable for surfaces that are in contact with food or intended for the preparation and serving of food. colorless bio impregnation for the protection and maintenance of wooden surfaces that come into contact with food the impregnation is absorbed deeply into the wood, and it makes the surface water-repellent It is used for the impregnation and maintenance of massive and veneered wooden surfaces which are used for the preparation and serving of food (kitchen counter, table, serving trolley, etc.). Surfaces covered with Belinka Oil Food Contact are later to be treated with the same product. The required maintenance interval depend on the type of wood, mechanical load and exposure to humidity. Kitchen units which are often exposed to humidity must be treated more frequently. Belinka oils are made from natural ingredients and are harmless to health and environmentally friendly. Warning Oil soaked cloths must be soaked in water or burnt after use, otherwise spontaneous combustion may occur. Share UseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Applied to wooden surfaces free of grease, wax, and other impurities. Prior to application, the wood surface should be finely sanded and dusted off. Before applying the oil the wood must be well dried, otherwise protection is not satisfactory. Mix the product well before use. Apply the oil abundantly using a cloth, brush or roller. After approx. 10-15 minutes, wipe the excess oil with a clean absorbent cloth or absorbent paper, then polish the surface with a dry cloth. To enhance the durability of wood repeat the process after 24 hours. Wood is well-protected when it no longer absorbs the oil. Protective clothing should be worn when using this product. Provide ventilation during coating. We advise against coating with Belinka Oil Food Contact if the temperature is below 15 °C. Clean the tools immediately after use with water and detergent, or with white spirit. Composition: vegetable oils and additives. Consumption: 50–100 ml/m2 of wood surface, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent or white spirit. Storage: in the originally sealed packaging at a temperature between 5 °C and 30 °C. Flash point: over 100 °C. Packaging unit: 0.5 l Surface area 0.1 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Use Technical data Informative calculation of consumption Material safety data sheets Technical documentation Applied to wooden surfaces free of grease, wax, and other impurities. Prior to application, the wood surface should be finely sanded and dusted off. Before applying the oil the wood must be well dried, otherwise protection is not satisfactory. Mix the product well before use. Apply the oil abundantly using a cloth, brush or roller. After approx. 10-15 minutes, wipe the excess oil with a clean absorbent cloth or absorbent paper, then polish the surface with a dry cloth. To enhance the durability of wood repeat the process after 24 hours. Wood is well-protected when it no longer absorbs the oil. Protective clothing should be worn when using this product. Provide ventilation during coating. We advise against coating with Belinka Oil Food Contact if the temperature is below 15 °C. Clean the tools immediately after use with water and detergent, or with white spirit. Composition: vegetable oils and additives. Consumption: 50–100 ml/m2 of wood surface, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent or white spirit. Storage: in the originally sealed packaging at a temperature between 5 °C and 30 °C. Flash point: over 100 °C. Packaging unit: 0.5 l Surface area 0.1 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Other products in this category Belinka Oil Interier colorless impregnation for the protection and maintenance of interior wooden surfaces forms a thin film on the surface that gives quality protection and a pleasant smooth surface an oiled surface is water repellent and dries quickly suitable for coating children’s toys ... Belinka Oil Exterier colorless bio impregnation decking, garden furniture, cladding, joinery contains agents that slow down mold development has a citrusy scent and dries quickly ...
