Belprotect Colourless coating used to improve the resistance of the coated surface Contains additives that protect the film against mould and algae With Belprotect, the coated surface retains its pre-coat colour The final appearance of the surface is glossy Belprotect is a colourless coating used to improve the resistance of the coated surface. It contains additives that protect the film against mould and algae. With Belprotect, the coated surface retains its pre-coat color. The product is also suitable as a top coat over dark-colored surfaces. Belprotect is not a biocidal product and is not intended to protect wood from wood pests such as fungi and insects. For this, we recommend the use of impregnations, such as Base or Impregnant. Belprotect is used in shaded areas that are frequently exposed to humidity and condensation, and where algae are very likely to occur. The coating is not suitable for the protection of raw wood or wood that has only been impregnated. The final appearance of the surface is glossy. Share UseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Before application, clean the existing coating of all impurities, slightly sand it and remove the dust. Mix before use, do not thin. Apply one coat with a brush or roller onto dry wood that has already been coated. When coating and drying, the temperature should be above +8 °C. Under normal weather conditions, the drying time is 24 hours. When coating wooden elements that will be mechanically loaded, dry them for a week before loading. The product is not suitable for restoring decorative coatings and should not be applied to damaged coatings. Clean a worn and algae-infected coating with Algid ccording to the instructions, and restore with Lasur or Toplasur UV Plus. Apply Belprotect as the final coat. We recommend systematic protection for the quality protection of wood that is in places exposed to humidity. Pre-protect raw, sanded wood with Base and two coats of Toplasur UV Plus or three coats of Lasur in desired shade. Apply Belprotect as the final coat. 1 l of Belprotect covers 15-25 m2 of surface. Surface area m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Use Technical data Informative calculation of consumption Material safety data sheets Technical documentation Before application, clean the existing coating of all impurities, slightly sand it and remove the dust. Mix before use, do not thin. Apply one coat with a brush or roller onto dry wood that has already been coated. When coating and drying, the temperature should be above +8 °C. Under normal weather conditions, the drying time is 24 hours. When coating wooden elements that will be mechanically loaded, dry them for a week before loading. The product is not suitable for restoring decorative coatings and should not be applied to damaged coatings. Clean a worn and algae-infected coating with Algid ccording to the instructions, and restore with Lasur or Toplasur UV Plus. Apply Belprotect as the final coat. We recommend systematic protection for the quality protection of wood that is in places exposed to humidity. Pre-protect raw, sanded wood with Base and two coats of Toplasur UV Plus or three coats of Lasur in desired shade. Apply Belprotect as the final coat. 1 l of Belprotect covers 15-25 m2 of surface. Surface area m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Other products in this category Belfresh Effective agent that removes the greyness from weather-exposed wood that has turned grey Helps to emphasize the natural colour of walkable surfaces, wall cladding and garden furniture Suitable for refreshing more resistant types of wood ... Algid Agent used to destroy green algae Colourless concentrated liquid Intended for professional and general use ... Belcare Colourless water-based product Fills up the micropores in the coating Improves water-resistance of the surface Refreshes the colour and extends the lifespan of the coating ...
